Visit Company's Website
Rotary Lobe Positive Displacement Sludge Pumps for Pumping Sludge

 
 
  LobePro Rotary Positive Displacement Pumps  
       
  A positive displacement pump operates by trapping a fixed amount of fluid from an intake pipe and then forcing (displacing) that trapped volume into a discharge pipe. LobePro pumps utilize intermeshing 4-wing helical lobes mounted on parallel shafts. The shafts are rotated by gears with a maintenance friendly design (no complicated timing gears to worry about). As the lobes un-mesh on the intake side, they create a cavity with an expanding volume. Your sludge or slurry flows into the cavity and is trapped by the lobes as they rotate.  
 

LobePro Rotary Pump

 
  LobePro  positive displacement rotary lobe pumps are ideal for pumping sludge, slurries and mud. Here are several great reasons to choose a LobePro rotary lobe pump:
  • Low shear/Pulse free operation
  • Excellent for oil/water separation or highly viscous fluids
  • Ability to pump at constant pressure at different flow rates
  • Self-priming to 25' wet
  • Capacities from 0-2,656 GPM with pressures to 175 psi
  • Forward and reverse pumping operation
  • Easy access to wet-end for in-place wear part replacement
  • Long operational lifespan at proper speed
  • Low maintenance
  • Space-saving compact design
  • 10 to 1 turndown capability and reverse capability
  • Run dry ability for a period of time
  • Pump speed can be varied from 50 to 600 RPM
  • Excellent for fine abrasives such as sand, sludge and bentonite because the pump can be run at low speed and lobes do not touch
 
 

LobePro Rotary Pump

 
 

LobePro Rotary Pump

 
     

Visit LobePro's website

         
         

| home | water | wastewater | fire protection | industrial | line card | contact | about | terms |


2003-2013 Northwestern Power Equipment Company, Inc.    All Rights Reserved

 

a Golnesar Design™ by BizProNet™